3/8" Dr 15 - 80 Ft Lbs / 20 - 100 Nm Norbar TW Model 100 Preset Ratchet Torque Wrench - 13053

The 3/8" Sq Dr 15.0 - 80.0 Ft Lbs / 20.0 - 100.0 Nm Norbar TW Model 100 P Type 'Industrial' Ratchet Torque Wrenche - 13053

P' Type Torque Wrenches are designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a torque testing device such as Norbar's Professional Torque Tester. The push-through ratchets on these models are robustly engineered for strength and durability. The strength and high wear resistance comes from a coarse tooth pattern while a principle of offset ratchet pawls gives a narrow engagement angle. The push-through square drive is not only a robust design but allows the wrench to be used for torque control in both the clockwise and anti clockwise directions, and allows for a wider model range of up to 400 N·m.

Features: 

• Setting system is designed to discourage unauthorised alteration.
• Coloured end seals are provided to identify the wrench to a particular operator, torque setting or calibration period.
• Accuracy of +/-3% of reading exceeds all international standards for torque wrenches.
• Every wrench comes supplied with a calibration certificate.
• Available with a high quality ratchet or as a 'Torque Handle'.
• Retained square drive will not pull out of the head when the socket is removed.
• Supplied in a moulded box for storage and protection.
• Length: 332 mm
• Square Size: 3/8"
• Weight: 0.68 Kg
• Ratchet Teeth: 72
• Accuracy: +/-3%
• Operates between:
  • 15.0 - 80.0 lbf·ft
  • 20.0 - 100.0 N·m
• Ratchet Type: Industrial Push-Through
• Ratchet Diameter: 35 mm