1/2" Dr 15 - 80 Ft Lbs / 20 - 100 Nm Norbar TW Model 100 Preset Ratchet Torque Wrench - 13054

The 1/2" Sq Dr 15.0 - 80.0 Ft Lbs / 20.0 - 100.0 Nm Norbar TW Model 100 P Type 'Industrial' Ratchet Torque Wrench - 13054

P' Type Torque Wrenches are designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a torque testing device such as Norbar's Professional Torque Tester. The push-through ratchets on these Norbar preset ratchet torque wrenches are robustly engineered for strength and durability. The strength and high wear resistance comes from a coarse tooth pattern while a principle of offset ratchet pawls gives a narrow engagement angle. The push-through square drive is not only a robust design but allows the wrench to be used for torque control in both the clockwise and anti clockwise directions, and allows for a wider model range of up to 400 N·m.

Norbar Preset Ratchet Torque Wrench Features:

• Setting system is designed to discourage unauthorized alteration.
• Colored end seals are provided to identify the wrench to a particular operator, torque setting or calibration period.
• Accuracy of +/-3% of reading exceeds all international standards for torque wrenches.
• Available with a high quality ratchet or as a 'Torque Handle'.
• Retained square drive will not pull out of the head when the socket is removed.
• Supplied in a molded box for storage and protection.
• Every wrench is supplied with a calibration certificate.
• Length: 338 mm
• Square Size: 1/2"
• Weight: 0.74 Kg
• Ratchet Teeth: 72
• Accuracy: +/-3%
• Operates between:
  • 15.0 - 80.0 lbf·ft
  • 20.0 - 100.0 N·m
• Ratchet Type: Industrial Push-Through
• Ratchet Diameter: 40 mm