1/4" Dr 8 - 35 In bs Tohnichi Digital Torque Screwdriver - STC400CN2-G

The Tohnichi STC400CN2-G 1/4" drive female hex digital torque measuring screwdriver has an English range of  8 - 35 In Lbs and a Metric Range of 80-400 cNm or 8-40 kgf.cm.

• Includes Tohnichi Factory Certificate of Calibration
• (NIST Traceable Certificate of Calibration offered for additional fee)

Features: 

• This digital torque driver is ideal for measuring or tightening torque applications in cNm, kgf.cm, In Lbs or In Oz.
• Portable and convenient method to confirm torque settings of torque screwdrivers.
• Display setting of this digital torque screwdriver set can be changed so you can read it from different view points

New Judgment Feature: Light indicator and buzzer alerts:

• In Tightening Mode, tool has light indicator (and buzzers) that alerts user to status:
• White: approaching target torque at 80%,
• Blue: achieved target torque
• Yellow / Red: over torque
• In Measuring Mode, inspection results are indicated :
• Blue: within hi/lo judgment parameters
• Yellow
• Red: outside hi/lo judgment parameters

• New Lithium-ion Battery for up to 30 Hrs Continuous Use
• New Expanded Memory Capacity: 1000 Data Memory Storage
• New USB port for easy data downloading
• Features Ratcheting Direction Control
• Accepts standard 1/4 hex root shape bits (sold separately See "Bit Selection" link below)
• New: STC2-G-BT Version Features Bluetooth Data Transfer Function
• Data Memory: 1000 Data
• Arithmetic Function: Sampling, Maximum, Minimum, Means
• Measurement Mode: PEAK/RUN
• Usage Direction: CW & CCW
• Usage Type: Measuring & Tightening
• Data Output: USB
• Reset Function: Manual/Auto 0.5 - 5.0 sec. adjustable by 0.5 step.
• Other Function: Auto power off (after 3 min.), Battery Life Indicator, Auto Zero
• Power Source: Lithium-ion Battery Pack BP-7
• Charging Time: Via Charger: 5 Hrs, Via PC (USB): 10 Hrs
• Continuous Use: Approx 30 Hrs.
• Operating Conditions [°C]: Temperature 0 ~ 40 Degrees C, no condensation
• Standard Accessories: Quick Charger BA-7, Lithium-ion Battery Pack BP-7, USB Cable
• Use STC2-G to spot check torque drivers (ex RTD with #700 bit) to confirm torque setting prior to use.

Note:

• Accepts standard, 6.35 (1/4) HEX bit. (sold separately)

 Made In Japan